PP melt blown filter performance characteristics and precautions

PP melt blown filter performance characteristics and precautions

Xinxiang Oudexin Filter Co., Ltd.           Date:2019-08-15 08:47:00
PP melt blown filter is a high-efficiency precision water filter produced from high-quality PP cotton material. The main specifications are 10 inches, 20 inches, 30 inches, 40 inches, and can be lengthened according to user requirements. It is suitable for large-scale use in water purification. It also has excellent chemical compatibility and is suitable for filtration of strong acids, alkalis and organic solvents. Strong dirt holding capacity, long service life and low cost.
 
Melt-blown filter performance characteristics:
First: the continuous polypropylene long fiber produced by melt-blown process using polypropylene as raw material
Second: high filtration precision, large flow, uniform structure, large amount of dirt and long service life
Third: good chemical compatibility, without any additives, the fiber is not easy to fall off
Fourth: a wide range of applications
 
PP melt blown filter precautions:
1. According to the precision of the filtered liquid and the impurities contained in the filter, the viscous liquid can be filtered by two stages, the coarse filter of the front stage can reduce the resistance and prolong the service life of the filter element (generally 3-4 times).
2. Install the filter element correctly. If the filtered water is found to be contaminated, carefully check whether the filter element is skewed and whether the two ends are strictly aligned and pressed.
3. When the pressure difference reaches 0.2MPa, the filter element should be cleaned or replaced.

Pre:What are the characteristics of the wire wound filter?

Next:Where are the main flow filters used?

Leave message

Please Feel free to give your inquiry in the form below.We will reply you in 24 hours.

Product Catalog